Retrofit Lane Assist, TSR la Octavia 3 2016

Salutare

Dupa cateva saptamani de studiat, comandat componente, apoi instalat si codat am reusit sa finalizez in proportie de 90% acest proiect.

A mai ramas calibrarea camerei (am programare la dealer Marti pe 23 dec)

Componente necesare:

Parbriz cod 5E0845011CTNVB (cu incalzire) - aprox 1280 lei pret la magazinele de piese auto
Camera Lane assist (Gen 3 3qd980654) - venita gata parametrizata din Rusia - 80 EUR + transport
Cablaj camera - tot din Rusia - 25 EUR
Oglinda retrovizoare heliomata (control si al oglinzilor laterale) - 3G0857511AF (de pe passat) - 160 lei din dezmembrari
pad cu gel (pt montajul senzorului de ploaie/umiditate/lumina)4E0955609 - 180 lei
Trim-uri (plastice) pt mascare - 5E0868437B Y20 - 1
5E0858634 Y20 - 1
5E0858633 Y20 - 1

(trim-urile costa aprox 150 lei)

Tras si conectat - am facut totul singur
Codare - am facut singur
Montaj parbriz - 190 lei

Calibrare camera la reprezentanta (350 lei)

Cu mentiunea sa i se atraga atentia celui care calibreaza sa introduca manual in odis anul 2018.

In cazul meu masina este din 2016 si camera din 2018 (nu se poate calibra decat daca se face acest lucru).

Pentru orice intrebari ma puteti contacta.

Am atasat si cateva poze.

O seara placuta tuturor.

 

Update: calibrare reusita. Retrofit functional 100%

Am avut noroc cu baiatul de la service deoarece a fost f. receptiv la sfaturile colegilor din Rusia. Initial am primit un mesaj de eroare ( i.am explicat ca trebuie selectat anul 2018 dar nu stia cum si unde). 2 -3 conversatii pe whatsapp si problema a fost rezolvata.

 

Urmeaza 2 retrofit-uri : 1. Xenon (cu toate componentele OEM) , radar ACC gen 1 (modelul rotund) cu activare TJA. (traffic jam assist)

In ianuarie voi posta capitolul 1.

Craciun fericit si un an nou cat mai bun!

 

Procedura de codare pt Octavia 3 2016 Combi / Lane Assist este urmatoarea:

Address 19: Diagnostic data bus interface

Equipment list → item “A5 - Front sensors of auxiliary systems for the driver” → enable → save.

Address 17: Instrument cluster

Encoding 07 → Long encoding →
Byte 4 → Bit 6 → activate
Byte 5 → Bit 2 → activate
Byte 11 → Bit 1 → activate

Address 08: A / C Electronics

Encoding 07 → Long Encoding → Byte 8 → Bit 0 → Activate

Address 09: Onboard supply control unit

Encoding 07 → Long encoding →
Byte 2 → Bit 0-2 → 03 Lighting: Bi-Xenon with Light Assist ( PR-8IG / 8IP + 8G1)
Closed area 16 → code 31347 → Adaptations 10 →
IDE08786-ENG116639-Auxiliary lighting functions-Fernlichtassistent Reset → Activate
IDE08786-ENG116637-Auxiliary lighting functions-Menuesteuerung Fernlichtassistent →
Available IDE08786-ENG116641 Menuesteuerung Fernlichtassistent Werkseinstellung → available

Address 10: Parking Assistant

Encoding 07 → Long Encoding → Byte 3 → Bit 5 → Activate

Address 44: Power steering

Closed area 16 → code 19249 →
Encoding 07 → Long encoding → Byte 0 → Bit 4 → activate

Address 5F: Informing electronics

Encoding 07 → Long encoding → Byte 24 → Bit 6 → Activate
Closed area 16 → Code 20103 → Adaptation 10 → Inporter 999 → equipment 12345
Car_Function_Adaptations:
ENG122227-ENG117506-Car_Function_Adaptations_Gen2-menu_display_Lane_Departure_Warning: → activate
ENG122227-ENG117508-Car_Function_Adaptations_Gen2-menu_display_Lane_Departure_Warning_over_threshold_high: → activate
ENG122227-ENG117636-Car_Function_Adaptations_Gen2-menu_display_road_sign_identification: → activate
ENG122227-ENG117638-Car_Function_Adaptations_Gen2-menu_display_road_sign_identification_over_threshold_high: → activate
Car_Function_List_BAP:
ENG122229-ENG117740-Car_Function_List_BAP_Gen2-LDW_HCA_0x19: → activate
ENG122229-ENG117741-Car_Function_List_BAP_Gen2-LDW_HCA_0x19_msg_bus: → CAN_Extended ( Additional data bus)
ENG122229-ENG117754-Car_Function_List_BAP_Gen2-traffic_sign_recognition_0x21: → activate
ENG122229-ENG117755-Car_Function_List_BAP_Gen2-traffic_sign_recognition_0x21_msg_bus: → CAN_Extended ( General tire data)

Address A5: Front sensors of auxiliary systems for the driver

[LO] _Brand: [VO] _Skoda
[LO] _Class: [VO] _A
[LO] _Generation: [VO] _Generation_7
[LO] _Bodystyle: [VO] _Estate
[LO] _Expansion: [VO] _Not_coded
[LO] _Production_region: [the VO] _EU
[the LO] _Country_variant: [the VO] _Europe
[the LO] _Chassis: [the VO] _Steel_springs
[the LO] _Steering_bar: [the VO] _Not_coded
[the LO] _Windshield: [the VO] _Heat_protecting_glass
[the LO] _Traffic_side: [the VO] _Right_traffic
[LO] _PSD_Version: [VO] _PSD_15
[LO] _Navigation: [VO] _MIB_high
[LO] _AAG: [VO] _Not_coded
[LO] _SWA: [VO] _Not_coded
[LO] _ACC: [VO] _Not_Coded
[LO] : [VO] _Not_coded
[LO] _Blind_spot_detection: [VO] _Coded
[The LO] _Rain_light_sensor: [the VO] _Coded
[the LO] _Main_unit: [the VO] _enabled
[the LO] _PLA: [the VO] _N0t_Coded
[the LO] _ESP: [the VO] _Coded
[LN] _Lan_assist_system_mode: [the VN] _Selection_over_menu
[the LO] _Personalized_key: [the VO] _Version_1.x
[the LO] _Networking_variant: [the VO] _MQB
[the LO] _Radar_interface: [the VO] _Not_Coded
[the LO] _Perso_HC: [the VO] _Last_setting
[the LO] _Point_of_intervention: [the VN] _late_setting_over_menu
[the LO] _LaneAssist_AGW_output: [the VO] _enabled
[LO] _Lane_assist_off_text: [VO] _enabled
[LO] _Emergency_Assist: [VO] _EA_Variant_1
[LO] _VZE: [VO] _Coded
[LO] _HC_mob_line: [VO] _Coded
[LO] _HC: [VO
] _F_fault : [VO] _last_mode
[LO] _FCWP_delivery_status_prewarning: [VO] _off
[The LO] _FCWP_extended_prewarning_settings: [the VO] _Not_coded
[the LO] _FCWP_warning_indicator: [the VO] _Not_coded
[the LO] _FCWP: [the VO] _Not_coded
[the LO] _FLA_Additional_High_Beam: [the VO] _no_Additional_High_Beam
[the LO] _FLA_Headinglight_type: [the VO] _Halogen
[the LO] _Mains_frequency: [VO] _50_Hz
[LO] _AFS_coding_Light_Assist: [VO] _High_Beam_Assist

In the admissions of the camera itself, do not forget to set:
[LN] _Lane_assist_on_state: [VN] _On_setting_over_menu
[LN] _Lane_assist_warning_intensity: [VN] _Selection_over_menu

Closed area 16 → code 20103 → Adaptation 10 (Revin cu adaptarile)

 

Am atasat poza cu codari si adaptari pt modulul A5 (lane assist camera)

 

NU CITA ULTIMUL MESAJ!
Buna ziua si felicitari pentru modificari!
Ai avut nevoie si de maneta de pe coloana colanului pentru lane assist pentru activarea functiilor sau te poti folosi doar de ce ai in meniu pentru a activa/dezactiva lane assist?
Mulțumesc

 

salutare. daca te referi la maneta pe ACC raspunsul este nu. Recomandarea este insa sa ai comenzi pe volan cu buton pentru asistenti (dar nu este obligatoriu deoarece merge sa activezi / dezactivezi din MIB)

 

Salut, de unde ai luat camera gata parametrizata?

 

Salutare. Am 3Q0 “pe stoc”